Review Details

LED T12 8ft. retrofit kit for converting 8ft. fluorescent T12 tubes to 4ft. T8 LED Tubes pre-wired

LED T12 8ft. retrofit kit for converting 8ft. fluorescent T12 tubes to 4ft. T8 LED Tubes pre-wired

Product Review (submitted on December 21, 2016):
I installed over 60 of these in our building they were easy to work with and the more I did the better got at it. only thing I would say to help is on the ends of the light where the ends clip into if they were made with a slight inward angle to the where the ends pointed in a little would help out. I found that some of the bulbs fit too loose and had to put the bend in the end. Just a on each end and it gave it just enough to hold the bulb well. everyone seems to like the lights very well.
LED T12 8ft. retrofit kit for converting 8ft. fluorescent T12 tubes to 4ft. T8 LED Tubes pre-wired

LED T12 8ft. retrofit kit for converting 8ft. fluorescent T12 tubes to 4ft. T8 LED Tubes. Pre-Wired 4.25’’ Ballast Cover Kit for Direct Drive LED Tubes; Includes 2 x 4’ Ballast Covers, 1 x Wiring Harness, 4 x Sockets and 8 x Tek Screws. Everything you need to go LED with old power sucking fluorescent T12 lamps except the LED T8 tubes . . . but we have a kit for that too! See below for options :) ETL approved.  Lamps sold separately. If you need lamps also use one of our kits that contain single end or A+B LED 4' lamps. Review the installation instructions before you order. 


Please see images for incompatible 8-foot T12 fluorescent fixtures. Our kit will not fit this type of fixture. Note the socket housing is too large.

$33.76