Fluorescent non-shunted socket for T8 LED lamps

Customer Reviews

Non-shunted socket for T8 LED lamps Review by Rueck

Price
Quality
Value

I love my purchase of 'non-shunted sockets for T8 LED lamps'. They are perfect for my conversion of my kitchen sink florescent light to LED. Thanks, TotalBulkLighting!! (Posted on 10/12/2021)

Best left to the professionals Review by Bham

Price
Quality
Value

I took up replacing some shunted sockets (old fluorescent bulb fixture) with these to make the conversion to LED, but as an inexperienced do-it-yourselfer I failed to appreciated the importance of the wire strip length to be stabbed in. I peeled back a little too much insulation on the neutral wire perhaps, regardless, the conductor went into the stab-in, but unknown to me, also protruded through a seam right behind the stab-in area, allowing it to exit the back of the socket. So now I'm unfortunately dealing with issues due to the short created when the neutral made contact with the (metal) fixture. I would heartily recommend these sockets for someone looking to wire-up a LED fixture, but please be mindful of the strip length, and that 18 gauge will find its way through the seem behind the stab-in if you put too much wire length into the stab-in. I'm rating the quality on these sockets poorly just because the location of the seam behind the stab-in is highly impractical. (Posted on 6/1/2021)

Fit perfect Review by Dave

Price
Quality
Value

Fit perfect, will buy again (Posted on 12/26/2020)

Perfect match Review by Guy

Price
Quality
Value

These parts were a perfect match to the existing one I had. Fit perfectly. (Posted on 7/14/2020)

Super simple Review by Sam

Price
Quality
Value

Fit just like the original shunted tombstones love the conversion to led (Posted on 5/19/2020)

Good Review by Geo

Price
Quality
Value

Just what I wanted (Posted on 5/9/2019)

Perfect product Review by The Make Space

Price
Quality
Value

We are wholesale replacing every florescent light in our makerspace to ballast-bypass LED tubes. These keystones allow us to setup an assembly line for the conversion. So far two rooms converted, totalling 50 tubes.

Other than no way to correct a wiring mistake, other than to cut off and replace, absolutely perfect, no improvements needed.

Thanks for helping us brighten our workshop and simultaneously cut our lighting bill! (Posted on 5/3/2019)

The light works well and looks good. However, I am mounting it above the garage door and the chai... Review by Bard

Price
Quality
Value

It was too large for some mount which I had to trim. Otherwise they worked well in other lights (Posted on 4/11/2019)

Worked Fine Review by DL

Price
Quality
Value

Socket was the same as the old one I needed to replace and it works fine (Posted on 2/22/2019)

I would buy again Review by jack

Price
Quality
Value

Fit perfect. as advertised. (Posted on 1/22/2019)