Bulk LTF 60watt LED no load electronic AC driver / transformer 12VAC ELV dimmable

# TA60WA12LED

Be the first to review this product

Bulk LTF 60watt LED no load electronic AC driver / transformer. Compact, low profile, small form factor easy to use design. Great for powering lighting applications. See specification sheet for more information.

Designer's Note

Converting your Halogen fixture to LED bulbs?

If you have any of these HALOGEN transformers similar to WAC-Lighting-EN-1260-R-AR, High-Tec Electronic Products TMO60S 120 20-60W E235548 transformer, SL-518, Ortek model CK-1260b-1, Novitronix 9801AR, Wang House Model WH-601E6A-3B, OrTek110v to12v 60W or transformer DR16S and want to move up to a LED bulb in your fixture we recommend this driver / transformer the LED TA60WA12LED. It will help with the flicker problem when using a halogen transformer with a LED Bulb. Also note that if your dimmer has a minimum load requirement it may not perform well. If this happens let us know, you will want to isolate any problems. Your qualified electrician will have no problem with installation.

No-load electronic transformers can only be bench tested with devices capable of measuring at higher frequencies such as a Fluke 289 or better voltage meter. No-load can be measured this way with or without a load on the device. The reason for this is a lower end meter standard electricians field meter would measure voltage that are DC or < 50-60 Hz only and not this transformer.

Measurements done with a field voltage meter will give an incorrect reading or no reading at all. Please be aware of this when testing the transformer. The no-load is designed for both LED Loads, and halogen / Incandescent bulbs.

However, for standard halogen lighting loads a no-load transformer is not necessary. Total lighting supply offers a video on testing standard transformers. Request the video and we will send it to you.

No-Load transformers can be full loaded to the load specifications. However we cannot guarantee full load performance if your circuit is not engineered correctly for lighting loads, lamp type or wire gauge and length. Proper project engineering is required or downgrading the load on the transformer may be a option.

Example: With a 300watt transformer, one single run at 300watts may required a #10 gauge wire depending on the distance.
Low voltage wire when used on some loads have voltage loss based on load type, wire size and distance from the transformer. Splitting the load when available may be a good option as the amperage at full load is very high.

Feel free to contact us on time sensitive or AIR orders before you place the order

Availability: Typically ships in 2 business days!

$30.73
Details
No minimum load electronic transformer.
  • Works with AC LED, AC Halogen or AC Incandescent low voltage lamps
  • ETL, UL recognized
    • UL recognized/listed Class 2 power supply, meets UL 2108 requirements
  • Short circuit protection
  • Auto reset and thermal protection
  • Soft start technology
  • Fully ELV dimmable
  • Low profile, small form factor
  • Advanced no load technology
  • High power factor
  • IP 60 rating
  • Isolated output power per NEC and UL safety requirements
Advantages of electronic transformers
  • Low cost
  • High frequency output -> smaller size
  • Lighter
  • Not prone to flicker like magnetic transformers
  • Auto-reset means they do not require circuit breakers like magnetic transformers
  • No minimum load required -> convenient
  • Higher efficiency -> operate at a lower temperature
  • Available with line filtering for lower conducted and radiated electrical emissions
Where to use electronic transformers
  • Locations that have limited space
  • Locations that are heat sensitive
  • Residential
  • Locations requiring low weight setup
  • Locations that may require transformer to be set up away from source (or close to load)
Disadvantages/When not to use
  • Don't use if location is known to have high temperatures
    • Electronic transformers are heat sensitive
  • May have audible noise
    • Can be resolved with transformer relocation
  • Shorter lifespan (~5-6 yrs)
  • Requires loads to be compatible with high frequency voltages
    • Usually may not work with cheaper LED loads
Additional Information
Color Black
Warranty Manufacture's 3 Year Limited
Important Note Feel free to contact us on time sensitive or AIR orders before you place the order
Primary Breaker No
Secondary Breaker No
Circuits Single
Terminal Block No
Dimmable Yes - see details
Cross Reference Number Eaglerise Model EEP60SE
Approvals cULus, ETL, FCC, RoHS
Max Load Wattage 60
Min Load Wattage 0
Input Voltage 120VAC
Output Voltage 12VAC
Electric Current Type AC
Dimensions H x W x L (in) 0.82" (21mm) x 1.30" (33mm) x 2.22" (56.5mm)
You may also be interested in the following product(s)
Customers Who Bought This Item Also Bought
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Bulk LTF 60watt LED no load electronic AC driver / transformer 12VAC ELV dimmable
Bulk LTF 60watt LED no load electronic AC driver / transformer. Compact, low profile, small form factor easy to use design. Great for powering lighting applications. See specification sheet for more information.
$30.73