EOM - EMCOD Open Mount Series EOM is revolutionary compact triac dimmable LED drivers for installation inside a fixture or a junction box. The transformer core and special low drop voltage rectifier are designed to lower losses and make the EOM series very efficient , energy saving with low temperature rise. All the EOM drivers have primary and secondary self-reset thermal circuit breakers, could be fully loaded, excelled load regulation, input and output are lead wires

ECV - EMCOD Constant Voltage ECV Series is Constant Voltage, PWM output, Triac (Phase) Dimmable Electronic LED Driver for Forward and Reverse Phase Dimmers. 5% minimum load. Over load, Short circuit protection. 96W 24V class 2. Excellent Line and Load regulation. Wide variety of compatible dimmers, flicker free dimming.

ML - MAG-LED Series is our Revolutionary Compact, dimmable, low profile magnetic LED Drivers on the market. The transformer core and special low drop voltage rectifier are designed to lower losses and make the ML series very efficient , energy saving with low temperature rise. All the ML drivers have primary and secondary self-reset thermal circuit breakers, could be fully loaded, has excelled load regulation, input and output are lead wires.

EM - EMCOD Indoor/Outdoor Series is a dimmable, magnetic, hard wire power supplies, which can supply 12V or 24V, AC or DC voltage to any kind of low voltage fixtures: LED, Halogen, Xenon an so on. The AC units have a boost tap on the primary side compensates wire drop voltage on a long run and maintains a brightness of your lights. Primary manually reset circuit breaker on all our products is standard. Secondary protection is optional for AC and standard for all DC products.Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

EGP - EMCOD Indoor/Outdoor General Purpose, Double or Multi-Circuit, Black Powder Coated Series is a dimmable, magnetic, hard wire power supplies, has been design not only for lighting application where is the output limitation is 300W per circuit. It can supply 12V / 24V AC for any other purpose. The boost tap on the primary side compensates a wire drop voltage on a long run. Primary manually reset circuit breaker on all products as a standard. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24 and can be used of indoor applications, as well.

EC2 - EMCOD Class 2 Indoor/ outdoor Multi-Circuit Series has been specifically designed to power large wattage lighting projects while meeting Class 2 regulations. The EM series consist of EM2, EM3, EM4, and EM6 power supplies with total wattage: 150W, 200W and 300W respectively. The max. wattage per each circuit for 12V is 50W and 96W for 24V and individually protected by easily re-settable circuit breaker . This series significantly reduces the project cost by using one transformer instead 3 - 6 units of class 2 separated transformers.

EMTP - EMCOD Timer and Photocell build in option EMTP - EMCOD LED Single Tap Landscape Build-in Timer and Photocell Options, Stainless or Black coated Steel The EMTP has large terminal block for easy installation and reliable operation. High grade core and copper winding provide excellent load regulation and efficiency. Build in timer and photocell options provide full control and energy savings. Secondary circuit breaker provide short circuit and overload protection. Removable door: Side Hinge. Suitable for Wet Location, ETL Listed to UL STD 2108, CSA STD C22.2 250.0

EMT - EMCOD Landscape Multi-Tap, Build-in Timer and Photocell Options, Stainless or Black coated Steel Series has been specifically designed for long distance applications to compensate wire drop voltage. An electrician can simultaneously select from up to four different output voltage 12V, 13V, 14V and 15V.The EMT has large terminal block for easy installation and reliable operation. High grade core and copper winding provide excellent load regulation and efficiency. Build in timer and photocell options provide full control and energy savings. Secondary toggle switch circuit breaker provide short circuit and overload protection. Removable door: Side Hinge or Slide Cover. Suitable for Wet Location, ETL Listed to UL STD 1838, CSA STD C22.2 250.0 and 250.7

EST - EMCOD LED Single Tap Landscape Build-in Timer and Photocell Options, Stainless or Black coated Steel Has been specifically designed for long distance applications to compensate wire drop voltage. to four different output voltage The EST has large terminal block for easy installation and reliable operation. High grade core and copper winding provide excellent load regulation and efficiency. Build in timer and photocell options provide full control and energy savings. Secondary toggle switch circuit breaker provide short circuit and overload protection. Removable door: Side Hinge. Suitable for Wet Location, ETL Listed to UL STD 1838, CSA STD C22.2 250.0 and 250.7