EM series transformers are a dimmable, magnetic, hard wire power supply, which can supply 12V or 24V AC or DC voltage for a variety of low voltage fixtures such as LED, Halogen, Xenon, etc. . . The boost tap on the primary side compensates wire drop voltage on a long run and maintains the brightness of your lights. A primary manually reset circuit breaker is standard on all units. Secondary protection is optional for AC units and standard for all DC transformers. The two section bobbin technology provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers installation costs. Enclosure rated NEMA 3R or IP24 for indoor or outdoor use.
This is an electrician installed item and does not include a timer, photocell or power cord. You are welcome to order these parts as separate components as your project requires. This is a magnetic transformer and requires a magnetic dimmer if dimming is required. Be aware not all fixtures and bulbs are dimmable. This transformer is available in both AC and DC, 12/24volt and 120 or 277volt. Make sure you have the correct unit and check your order carefully.
This is a lighting transformer and not made to work with motors or other types of electrical circuits. Always refer to the lighting diagram included on each web page before you commit to this product. If you have questions please contact us.
Color | Black |
---|---|
Warranty | 90 Days |
Important Note | Feel free to contact us on time sensitive or AIR orders before you place the order |
Primary Breaker | Yes |
Secondary Breaker | Yes |
Circuits | Single |
Terminal Block | No |
Dimmable | Magnetic Dimmer - dimmer's minimum load must be maintained |
Material | Steel |
Cross Reference Number | ODC150S24VDC, ODC150S24DC, TMC150S24VDC, TMC150S24DC, TRA150-120V-24VDC, STDC-MD15024, FL-150W-24V-LED-DIM |
Approvals | cETLus |
Max Load Wattage | 150 |
Input Voltage | 120VAC |
Output Voltage | 24VDC |
Electric Current Type | DC |
Dimensions H x W x L (in) | See spec sheet |